Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

538 Brocade Network Advisor SAN User Manual
53-1002167-01
Tape LUN statistics
18
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays (Figure 248). The dialog box lists configured crypto
target containers.
FIGURE 248 Encryption Targets dialog box
3. Select the container of type Tape for which to display or clear statistics.
4. Click Statistics.
The Tape LUN Statistics dialog box displays (Figure 249). The dialog box lists the statistics for
all LUNs that are members of the selected tape container.
FIGURE 249 Tape LUN Statistics dialog box
5. To clear the tape LUN statistics for member LUNs in the container, click Clear.
6. When prompted with a confirmation dialog box, click Yes.
7. To update the tape LUN statistics, click Refresh.