Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 545
53-1002167-01
Master keys
18
7. Run the additional cards through the reader that are needed for the set. As you read each card,
the card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
8. Enter the mandatory last name and first name of the person to whom the card is assigned.
9. Enter a Card Password.
10. Re-enter the password for verification.
11. Record and store the password in a secure location.
12. Click Write Card.
The dialog box prompts you to insert the next card, up to the number of cards specified in
step 5.
13. Repeat step 6 through step 12 for each card in the set.
14. After the last card is written, click OK in the Master Key Backup dialog box to finish the
operation.
Restoring a master key from a file
Use the following procedure to restore the master key from a file.
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays (Figure 253).
FIGURE 253 Select a Master Key to Restore (from file) dialog box