Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 547
53-1002167-01
Master keys
18
6. Enter the key ID of the master key that was backed up to the key vault.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.
Restoring a master key from a smart card set
A card reader must be attached to the SAN Management application PC to complete this
procedure.
Use the following procedure to restore the master key from a set of smart cards.
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays (Figure 255).
FIGURE 255 Select a Master Key to Restore (from a recovery set of smart cards) dialog box
4. Choose the active or alternate master key for restoration, as appropriate. Refer to “Active
master key” on page 540 and “Alternate master key” on page 540 for more information on
active and alternate master keys.
5. Select A Recovery Set of Smart Cards as the Restore From location.