Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

564 Brocade Network Advisor SAN User Manual
53-1002167-01
Viewing and editing switch encryption properties
18
Importing a signed public key certificate from Properties
To import a signed public key certificate, complete the following steps.
1. Click Import.
The Import Signed Certificate dialog box displays (Figure 267).
FIGURE 267 Import Signed Certificate dialog box
2. Enter or browse to the file containing the signed certificate.
3. Click OK.
The file is imported onto the switch.
Enabling and disabling the encryption engine state from Properties
To enable the encryption engine, complete the following steps:
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays.
2. Select an encryption engine from the Encryption Center Devices table, then select Engine >
Properties from the menu task bar, or right-click an encryption engine and select Properties.
The Encryption Properties dialog box displays.
3. In the Encryption Engine Properties table, locate Set State To.
4. Click the adjacent Engine field and select Enabled or Disabled accordingly.
5. Click OK.