Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

588 Brocade Network Advisor SAN User Manual
53-1002167-01
Zoning configuration
19
Customizing the zone member display
The following procedure applies to the zone display in the standard Zoning dialog box and also to
the LSAN Zoning dialog box.
1. Select Configure > Zoning > Fabric.
For LSAN zoning, select Configure > Zoning > LSAN Zoning (Device sharing).
The Zoning or LSAN Zoning dialog box displays, based on the Configure > Zoning menu
selection.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Click the plus sign (+) by the appropriate zone in the Zones list to expand the listing and show
the zone’s members.
5. Right-click the name of any zone member and select Member Display.
The Zone Member Display dialog box displays.
6. Select or clear the check boxes for the properties you want to display or hide.
All of the options are selected by default. You cannot clear the WWN / Domain,Port Index
check box. It is always selected.
7. Select a property and click the Up or Down buttons to rearrange the order in which the
properties are displayed.
8. Click OK.
The display is changed for all zone members in the Zones list.
Enabling or disabling the default zone for fabrics
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select the zoning database you want from the Zone DB list.
5. Click Zoning Policies.
The Zoning Policies dialog box displays.
NOTE
The format and content of this dialog box vary slightly depending on Interop Mode, the target
selected in the Zoning Scope list, and whether safe zoning mode is enabled. If safe zoning
mode is enabled, the Default Zone button is disabled. If you want to enable the default zone,
you must disable the safe zoning mode.