Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

598 Brocade Network Advisor SAN User Manual
53-1002167-01
Zoning configuration
19
Refreshing a zone database
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a zone database from the Zone DB list.
4. Select Refresh from the Zone DB Operation list.
A message displays informing you that refresh will overwrite the selected database. Click Yes to
continue.
5. Click OK.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Merging two zone databases
If a zone or zone configuration is merged, the resulting zone or zone configuration includes all
members that were marked for addition or removal as well as all members not otherwise marked.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select Compare from the Zone DB Operation list.
The Compare/Merge Zone DBs dialog box displays, as shown in Figure 280.