Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Document Title 647
xx-xxxxxxx-01
Configuring an FCIP tunnel
20
1. Select Configure > FCIP Tunnels.
The FCIP Tunnels dialog box is displayed (Figure 287). All discovered fabrics with extension
switches are listed under devices.
FIGURE 287 FCIP Tunnels dialog box (fabric selected from Product tree)
2. Select the switch you want to configure under the Products tree.
3. Click the Add button, or right-click on the switch and select Add Tunnel.
The Add FCIP Tunnel dialog is displayed (Figure 288). The name of the switch you selected is
displayed in the Switch field under Switch One Settings. This dialog allows you to configure
settings for both switches on either end of the tunnel.
A Circuits properties table displays at the bottom of the dialog box. For 8 Gbps platforms, this
may contain columns for multiple circuits. Actual, as well as cached circuits display. You can
configure circuits using the Add, Edit, Delete, Enable, and Disable circuits using the function
buttons to the right of the table. For 4 Gbps platforms, the Delete, Enable, and Disable buttons
do not display. In addition, the Edit operation is only supported for cached circuits.