Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 27
53-1002167-01
Management server and client
1
Logging into a server
You must log into a server to monitor your network.
NOTE
You must have an established user account on the server to log in.
To log into a server, complete the following steps.
1. Double-click the desktop icon or open the application from the Start menu.
The Log In dialog box displays (Figure 13).
FIGURE 13 Log In dialog box
2. Enter your user name and password.
3. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.
To change your password, refer to “Changing your password” on page 146.
4. Click Login.
5. Click OK on the Login Banner dialog box.
The Management application displays.
Launching a remote client
To launch a remote client, complete the following steps.
1. Open a web browser and enter the IP address of the Management application server in the
Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example, IP_Address:Port_Number.
The Management application web start screen displays.
2. Click the Management application web start link.
The Log In dialog box displays.
3. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
4. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.