Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 29
53-1002167-01
Management server and client
1
4. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you use an FTP Server which is not configured on the same machine as the Management
application, the Firmware Repository feature will not be available.
FIGURE 14 FTP Server screen
5. Complete the following steps on the Server IP Configuration screen.
FIGURE 15 Server IP Configuration screen
a. Select an address from the Server IP Configuration list.