Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

692 Brocade Network Advisor IP User Manual
53-1002168-01
Adding thresholds
22
Adding a Security threshold
NOTE
This threshold is only available for M-EOS devices.
To add a Security threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
The Port Fencing dialog box displays.
2. Select Security from the Violation Type list.
3. Click Add.
The Add Security Threshold dialog box displays (Figure 309).
FIGURE 315 Add Security Threshold dialog box
4. Enter a name for the threshold in the Name field.
5. Select the number of port events allowed for the threshold from the Threshold errors list.
6. Select the time limit for the threshold from the violations per list.
7. Cl ic k OK to add the security threshold to the table and close the Add Security Threshold dialog
box.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 693.
8. Click OK on the Port Fencing dialog box.