Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

700 Brocade Network Advisor IP User Manual
53-1002168-01
Adding thresholds
22
Editing a State Change threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To edit an State Change threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
The Port Fencing dialog box displays (Figure 307).
FIGURE 322 Port Fencing dialog box
2. Select State Change (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
The Edit State Change Threshold dialog box displays.
FIGURE 323 Edit State Change Threshold dialog box
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
• Default—Uses device defaults. Go to step 8.
• Custom—Uses your selections. Continue with step 6.