Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

810 Brocade Network Advisor SAN User Manual
53-1002167-01
Thresholds and event notification
27
The threshold policy displays in the Available Threshold Policies table with a modified icon
( ). To assign a threshold policy to a fabric or device, refer to “Assigning a threshold policy” on
page 811.
12. Click OK on the Set Threshold Policies dialog box.
The Confirm Threshold Changes dialog box displays.
FIGURE 356 Confirm Threshold Changes dialog box
13. Make the threshold changes by selecting one of the following options:
• To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
• To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
14. Click OK on the Confirm Threshold Changes dialog box.
Duplicating a threshold policy
To duplicate a threshold policy, complete the following steps.
1. Select Monitor > Performance > Configure Thresholds.
The Set Threshold Policies dialog box displays.
2. Select the threshold policy you want to copy in the Available Threshold Policies table.
3. Click Duplicate.
The threshold policy displays in the Available Threshold Policies table with an added icon ( )
using the following naming format copy of Threshold_Name. To edit the threshold, refer to
“Editing a threshold policy” on page 809. To assign a threshold policy to a fabric or device,
refer to “Assigning a threshold policy” on page 811.
4. Click OK on the Set Threshold Policies dialog box.
The Confirm Threshold Changes dialog box displays.
5. Make the threshold changes by selecting one of the following options:
• To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
• To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
6. Click OK on the Confirm Threshold Changes dialog box.