Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

814 Brocade Network Advisor SAN User Manual
53-1002167-01
SAN Connection utilization
27
Disabling connection utilization
NOTE
Fabrics where performance data collection is not enabled display connections as thin black lines.
To turn off the connection utilization, choose one of the following options:
• Select Monitor > Performance > View Utilization (or CTRL + U).
• Press CTRL + U.
• Click the Utilization icon ( ).
The Utilization Legend is removed from the main interface window.
Changing connection utilization
You can change the utilization percentages.
To change the utilization percentages, complete the following steps.
1. Click the change link in the utilization legend.
FIGURE 358 Utilization Legend in edit mode
2. Enter or select the end percentage you want for the blue line.
When you make a change to the end percentage of a utilization line, you also change the start
percentage for the utilization line immediately above the one you changed when you click
apply. For example, if you change the blue line end percentage to 60 the yellow line start
percentage changes to 60 when you click apply.
3. Enter or select the end percentage you want for the yellow line.
4. Click the apply link.
The new values appear in the utilization legend.