Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 835
53-1002167-01
Editing a policy monitor
29
c. Enter the minimum number of connections allowed between a switch pair in the Minimum
Connections field.
The default recommended is 2.
d. Select the Check if the product is configured to send Upload Failure Data Capture to an
FTP server check box to determine the following configurations:
• Upload Failure Data Capture is enabled on the selected switches
• Configured FTP Server is accessible
• You have write permission to the directory.
e. To add switches, select the switches to which you want to apply this policy in the Available
Switches table and click the right arrow button.
The selected switches display in the Selected Switches table.
f. To remove switches, select the switches to which you do not want to apply this policy in the
Selected Switches table and click the left arrow button.
The removed switches display in the Available Switches table.
9. To set policy monitors for hosts, select the Host Checks tab and complete the following steps.
a. Select the Check for redundant connections to attached fabrics check box to determine if
there are at least the minimum number of configured physical connections between the
host and the attached fabric.
b. Enter the minimum number of connections between the host and the attached fabric in
the Minimum Connections field.
The default recommended is 2.
c. To add hosts, select the hosts to which you want to apply this policy in the Available Hosts
table and click the right arrow button.
The selected hosts display in the Selected Hosts table.
d. To remove hosts, select the hosts to which you do not want to apply this policy in the
Selected Hosts table and click the left arrow button.
The selected hosts display in the Available Hosts table.
10. To set policy monitors for the Management application, complete the following steps.
a. Select the Management Checks tab.
b. Select the Check to see if the server backup is enabled and working check box to
determine the following configurations:
• Back up enabled for the Management application server.
• Backup output directory is accessible and writable.
This policy only applies to scheduled backup, not manual (on demand) backup.
11. Click OK on the Edit Monitor dialog box.
The updated policy monitor displays in the Monitors table.
12. Click Close on the Policy Monitor dialog box.