Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 837
53-1002167-01
Running a policy monitor
29
4. Review the report details.
• Fabric Checks—Displays the Fabric Name and Status of the policy check for the following
options:
 Fabric - Check zoning is Enabled
 Fabric - Check that all zones belong to at least one zone config
 Fabric - Check the number of initiator ports zoned to each storage port is less than
Configured_Value
• SAN Switch Checks—Displays the switch name and switch IP address and Status of the
policy check for the following options:
 SAN Switch - Check if the product is configured to send events to this server
 SAN Switch - Check if the product is configured to send Upload Failure Data Capture to
an FTP server
 SAN Switch - Check for at least Configured_Minimum_Value connections to
neighboring switches
• Host Check—Displays the Host name and Status of the policy check for the following
option:
 Host - Check for at least Configured_Minimum_Value connections to attached fabrics
• Management Check—Displays the Status of the policy check for the following option:
 Management - Check to see if the server backup is enabled and working
To export a report, refer to “Exporting SAN reports” on page 925.
5. Click the close button (X) on the Policy_Name - Policy Monitor Report browser window.
6. Click Close on the Policy Monitor dialog box.