Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

838 Brocade Network Advisor SAN User Manual

53-1002167-01

Viewing a policy monitor report

To view an existing (must have been run at least once) policy monitor report, complete the following

steps.

1. Select Monitor > Policy Monitor.

The Policy Monitor dialog box displays.

2. Select the policy for which you want to view a report in the Monitors table.

3. Click Report.

The Policy_Name - Policy Monitor Report displays in a web browser.

FIGURE 368

Policy_Name

- Policy Monitor Report

4. Review the report details.

When a policy status fails or partially fails, the status is highlighted in pink.

• Fabric Checks—Displays the Fabric Name and Status of the policy check for the following

options:

 Fabric - Check zoning is Enabled/Disabled (depends on your setting)

 Fabric - Check that all zones belong to at least one zone config

 Fabric - Check the number of initiator ports zoned to each storage port is less than

Configured_Value