Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

852 Brocade Network Advisor SAN User Manual
53-1002167-01
SNMP traps
30
FIGURE 373 SNMP Trap Forwarding dialog box
The SNMP Trap Forwarding dialog box allows you to perform the following tasks:
• Add a trap destination.
• Edit a selected trap destination.
• Duplicate a selected trap destination.
• Delete a selected trap destination.
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in Figure 373, displays.
2. Click the Enable trap forwarding check box.
3. Click Add in the SNMP Trap Forwarding dialog box.
The Add Trap Destination dialog box, shown in Figure 374, displays.