Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

864 Brocade Network Advisor SAN User Manual
53-1002167-01
Syslogs
30
Removing a syslog recipient
1. Select Monitor > Syslog Configuration > Product Trap Recipients.
The Syslog Recipients dialog box displays.
2. Select Remove from the Action list.
3. Enter the IP address of the syslog port (the recipient server) in the Recipient IP Address field.
4. Select the fabric or switches from the Available list.
5. Click OK.
The Management application removes the recipient from the managed switches.
Syslog forwarding
The Syslog Forwarding dialog box enables the Management application to forward syslog events to
a destination on another host. You can use the Syslog Forwarding feature to set up filters to
determine which syslog events will be forwarded.
1. Select Monitor > Syslog Configuration > Syslog Forwarding.
The Syslog Forwarding dialog box, shown in Figure 381, displays.
FIGURE 381 Syslog Forwarding dialog box
The Syslog Forwarding dialog box allows you to perform the following tasks:
• Add a syslog destination.
• Edit a selected syslog destination.
• Duplicate a selected syslog destination.
• Delete a selected syslog destination.