Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

872 Brocade Network Advisor SAN User Manual

53-1002167-01

Event action definitions

Configuring event action policies

The Policy pane of the Add Event Action dialog box, shown in Figure 388, allows you to define the

frequency of the event, enter a message for an event that will be displayed in the event log, and

specify the event severity.

FIGURE 388 Policy pane of the Event Action dialog box

1. Click Act on all occurrences (default) if you want the action to be triggered each time the

selected events occur.

2. Click Act as specified if you want the action to be triggered only when the occurrence of the

event meets the specified criteria.

3. Click If occurs at least __ times in __minutes if you want the action to be applied only if the

event occurs at a certain frequency. Then specify the frequency by selecting one of the

following options:

- Click Frequency bound (act as count reaches the count specified) if you want the

Management application to perform the specified action once the specified number of

occurrences has occurred during the specified duration. For example, if you want the

action to be applied when 10 link down traps occur during a one-minute interval, then the

specified action will be applied as soon as 10 link down traps occur, even though the one-

minute duration has not elapsed.