Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

882 Brocade Network Advisor SAN User Manual
53-1002167-01
Pseudo events
30
Pseudo events
A pseudo event is a combination of different SNMP traps that you decide would constitute a single
event. For example, there are two separate SNMP traps for link up and link down occurrences. You
might decide that these two occurrences should be just one event.
Displaying pseudo event definitions
Perform the following steps to display the properties of a pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 394, displays.
FIGURE 394 Pseudo Events dialog box
2. To view additional information for a definition, select a definition from the list. Additional
information displays in the Details of Selected Pseudo Event list at the bottom of the dialog
box.
Creating pseudo event definitions
Perform the following steps to create a pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box displays.
2. Click Add.
3. The Identification pane of the Add Pseudo Event dialog box displays.
4. Type a unique name for the pseudo event. Duplicate names are not allowed.
5. Select the check box to enable the pseudo event or clear the check box to disable the pseudo
event.
6. Click Next.
The Policy pane of the Add Pseudo Event dialog box, shown in Figure 395, displays.