Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 885

53-1002167-01

Pseudo events

1. From the Available Traps list, select the trap for the down state of a product or interface.

2. You can change the text associated with the selected trap by doing any of the following:

• Click one of the following buttons:

 MIB Information, if you want the default SNMP name for the traps to be displayed.

 MIB Alias, if you want the aliases for the traps to be displayed.

• Use the Trap Filter tool to limit the trap severity. To use this tool, click the Filter button to

display the Trap Filters dialog box.

3. After limiting the list of available traps, expand the MIB folder to which the trap you want

belongs under the Available Traps list, or right-click to select that trap. Click the right arrow

button to move it to the Selected Traps list.

4. Select a trap for the up state of the condition. (Follow step 3 through step 6.)

NOTE

You must select a down and an up trap. You cannot select the same trap for the up and down

conditions.

5. Click Next to advance to the Summary pane.

6. Click Finish to save your definition. The new pseudo event appears on the Pseudo Event list on

the Pseudo Event dialog box.

Creating a pseudo event definition by copying an existing definition

You can create a pseudo event definition by copying an existing definition. Perform the following

steps.

1. Select Monitor > Event Processing > Pseudo Events.

The Pseudo Events dialog box, shown in Figure 394, displays.

2. Select the pseudo event definition that you want to copy from the Pseudo Events list.

Click the Duplicate button to display the Duplicate Pseudo Event dialog box.

The name of the event action is the name of the selected action with the word “copy”

appended. For example, Event1 becomes Event1 copy.

3. Enter a new name for the pseudo event definition.

4. Make the changes you want to make to the definition. Refer to “Creating pseudo event

definitions” on page 882 for details.

5. Click Finish to save your definition.