Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

66 DCFM Enterprise User Manual
53-1001357-01
Logging into a remote client
3
Logging into a remote client
To log into a remote client, complete the following steps.
1. Open a web browser and enter the IP address of the Management application server in the
Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example, <IP_Address>:<Web_Server_Port_Number>.
The Management application web start screen displays.
2. Click the Management application web start link.
The Log In dialog box displays (Figure 20).
FIGURE 20 Log In Dialog Box
3. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
4. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.
5. Click Login.
6. Click OK on the Login Banner dialog box.
The Management application displays.