Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

88 DCFM Enterprise User Manual

53-1001357-01

Removing all devices and filters from a call home center

To remove all devices and filters from a call home center, complete the following steps.

1. Select Monitor > Event Notification > Call Home.

The Call Home dialog box displays.

2. Select the call home center from which you want to remove devices and filters in the Call Home

Center table.

3. Click the left arrow button.

A confirmation message displays.

4. Click OK.

All devices assigned to the selected call home center display in the Products List table. Any

assigned filters are also removed.

5. Click OK to close the Call Home dialog box.

Call Home for virtual switches

For virtual switches, there are two types of Call Home events:

• FRU-based Call Home events which are triggered at the chassis level.

• Port-based Call Home events, which are triggered for each virtual switch.

Defining an event filter

To define an event filter, complete the following steps.

1. Select Monitor > Event Notification > Call Home.

The Call Home dialog box displays.

2. Click Add beneath the Call Home Event Filter table.

The Call Home Event Filter dialog box displays.

3. Enter a name for the filter in the Name field.

4. Enter a name for the description in the Description field.

5. Select the events you want to include in the filter in the Available Call Home Event Types table.

Click Select All to select all event types in the table or select Unselect All to clear the selected

event types in the table. For more information about Call Home events, refer to Appendix B,

“Call Home Event Tables”.

6. Click OK.

The Event Filter name and the description are displayed in the Call Home dialog box.

7. Click OK to close the Call Home dialog box.