Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

138 DCFM Enterprise User Manual
53-1001357-01
Setup tools
3
7. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.
8. Click Login.
9. Click OK on the Login Banner.
Setup tools
You can add third-party tools to the Tools menu or shortcut menus to open other software products
you frequently use.
Adding a tool
You can specify third-party tools so they appear on the Setup Tools dialog box. From there, you can
add them to the Tools menu and then open the tools directly from the Management application.
To add a tool, complete the following steps.
1. Select Tools > Setup.
The Setup Tools dialog box displays.
2. Click the Tools Menu tab.
3. Click Define.
The Define Tools dialog box displays (Figure 51).
FIGURE 51 Define Tools Dialog Box
4. Type the tool’s name in the Tool Name field as you want it to appear on the Tools menu.
5. Type or browse to the path of the executable file in the Path field.
6. Type or browse to the path of the folder that you want to set as your working folder in the
Working Folder field.
7. Click Add to add the tool.
The Setup Tools dialog box displays with the new tool added to the Tools Menu Item table.
NOTE
You must click Add before clicking OK; otherwise, your changes will be lost.