Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

156 DCFM Enterprise User Manual

53-1001357-01

Grouping on the topology

Expanding groups

To expand a group on the topology, do one of the following:

• Double-click on the group icon.

• Right-click the group icon and select Expand from the shortcut menu.

To expand all groups on the topology by one level, click the Expand button on the toolbox ( ).

Viewing connections

You can view the connections in a fabric using one of the following methods:

• Select a fabric and then select View > Connected End Devices and select Hide All, Show All, or

Custom.

• Right-click on the fabric and select Connected End Devices > Hide All, Show All, or Custom.

Configuring custom connections

NOTE

Active zones must be available on the fabric.

To create a display of the connected end devices participating in a single zone or group of zones,

complete the following steps.

1. Choose from one of the following options:

• Select a fabric on the topology and select View > Connected End Devices > Custom.

• Right-click a fabric on the topology and select Connected End Devices > Custom.

The Connected End Devices - Custom display for <Fabric> dialog box displays with a list of

zones in the Zones in <Fabric> list.

2. Select the zones you want to include in the connection in the Zones in <Fabric> list.

3. Select the application you want to add the selected zones to in the Application list.

4. Click the right arrow to move them to the Selected Zones list.

5. Click OK.

Saving a custom connection configuration