Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

212 DCFM Enterprise User Manual
53-1001357-01
Editing thresholds
5
Editing a Link threshold
To edit a Link threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select Link from the Violation Type list.
3. Click Edit.
The Edit Link Threshold dialog box displays.
FIGURE 90 Edit Link Threshold Dialog Box
4. Change the name for the threshold in the Name field, if necessary.
5. Change the number of link events allowed for the threshold from the Threshold errors list.
6. Select the time period for the threshold (in minutes) from the errors per list.
7. Click OK on the Edit Link Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 207.
8. Click OK on the Port Fencing dialog box.