Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

298 DCFM Enterprise User Manual
53-1001357-01
Performance overview
8
Performance measures
Performance measures enable you to select one or more measures to define the graph or report.
The measures available to you depend on the object type from which you want to gather
performance data.
• Tx % Utilization — available for FC, GE, Managed HBA ports, 10GE ports, and FCIP tunnels.
• Rx % Utilization — available for FC, GE, Managed HBA ports, 10GE ports, and FCIP tunnels.
• Tx MB/Sec — available for FC and GE, Managed HBA ports, 10GE ports, FCIP tunnels, and
End-to-End monitors.
• Rx MB/Sec — available for FC and GE, Managed HBA ports, 10GE ports, FCIP tunnels, and
End-to-End monitors.
• CRC Errors — available for FC, Managed HBA ports, 10GE ports and End-to-End monitors.
• Signal Losses — available for Managed HBA ports and FC ports.
• Sync Losses — available for Managed HBA ports and FC ports.
• Link Failures — available for Managed HBA ports and FC ports.
• Sequence Errors — available for FC ports.
• Invalid Transmissions — available for FC ports.
• Rx Link Resets — available for FC ports.
• Tx Link Resets — available for FC ports.
• Dropped Packets — available for FCIP tunnels only.
• Compression Ratio — available for FCIP tunnels only.
• Latency — available for FCIP tunnels only.
• Link Retransmits — available for FCIP tunnels only.
• Timeout Retransmits — available for FCIP tunnels only.
• Fast Retransmits — available for FCIP tunnels only.
• Duplicate Ack Received — available for FCIP tunnels only.
• Window Size RTT — available for FCIP tunnels only.
• TCP Out of Order Segments — available for FCIP tunnels only.
• Slow Start Status — available for FCIP tunnels only.
• Frames Received — available for 10GE ports only.
• Overflow Errors — available for 10GE ports only.
• Runtime Errors — available for 10GE ports only.
• Receive EOF — available for 10GE ports only.
• Too Long Errors — available for 10GE ports only.
• Underflow Errors — available for 10GE ports only.
• Alignment Errors — available for 10GE ports only.
• NOS Count — available for Managed HBA ports only.
• Error Frames — available for Managed HBA ports only.
• Under Sized Frames — available for Managed HBA ports only.
• Over Sized Frames — available for Managed HBA ports only.
• Primitive Sequence Protocol Errors — available for Managed HBA ports only.