Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

322 DCFM Enterprise User Manual
53-1001357-01
Creating a threshold policy
8
FIGURE 121 New Threshold Policy dialog box
3. Enter a name for the policy (100 characters maximum) in the Name field.
4. Select a policy type from the Policy Type list.
You can only define policies for E and F/FL ports.
5. Select a measure from the Measure list.
You can only define policies for the Tx and Rx % Utilization measures. You cannot add the same
measure more than once. If you try to add another threshold with the same measure, the new
values overwrite the older threshold values in the Selected Thresholds table.
6. Enter a percentage for the high boundary in the High Boundary field.
7. (Fabric OS only) Enter a percentage for the low boundary in the Low Boundary field.
8. (Fabric OS only) Enter a percentage for the buffer in the Buffer Size field.
9. Click the right arrow button to move the threshold to the Selected Thresholds table.
If an error is detected, a message displays informing you to enter a valid value. Click OK to
close this message. Fix any errors and repeat step 9.
10. Repeat steps 5 through 9 for each measure that you want to add to the policy.