Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)
324 DCFM Enterprise User Manual
53-1001357-01
Duplicating a threshold policy
8
8. (Fabric OS only) Enter a percentage for the buffer in the Buffer Size field.
9. Click the right arrow button to move the threshold to the Selected Thresholds table.
If an error is detected, a message displays informing you to enter a valid value. Click OK to
close this message. Fix any errors and repeat step 9.
10. Repeat steps 5 through 9 for each measure that you want to add to the policy.
11. Click OK on the Edit Threshold Policy dialog box.
The threshold policy displays in the Available Threshold Policies table with a modified icon
( ). To assign a threshold policy to a fabric or device, refer to “Assigning a threshold policy” on
page 325.
12. Click OK on the Set Threshold Policies dialog box.
The Confirm Threshold Changes dialog box displays.
FIGURE 123 Confirm Threshold Changes dialog box
13. Make the threshold changes by selecting one of the following options:
• To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
• To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
14. Click OK on the Confirm Threshold Changes dialog box.
Duplicating a threshold policy
To duplicate a threshold policy, complete the following steps.
1. Select Monitor > Performance > Configure Thresholds.
The Set Threshold Policies dialog box displays.
2. Select the threshold policy you want to copy in the Available Threshold Policies table.
3. Click Duplicate.
The threshold policy displays in the Available Threshold Policies table with an added icon ( )
using the following naming format copy of <Threshold_Name>. To edit the threshold, refer to
“Editing a threshold policy” on page 323. To assign a threshold policy to a fabric or device,
refer to “Assigning a threshold policy” on page 325.
4. Click OK on the Set Threshold Policies dialog box.
The Confirm Threshold Changes dialog box displays.