Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 7
53-1001357-01
Menu bar
1
Allow/Prohibit Matrix. Select to allow FICON users to
configure an Allow/Prohibit Matrix table. You can select
any matrix tables and compare them either vertically or
horizontally.
Port Groups. Select to configure a group of ports from
one or more switches within the same fabric.
FC Troubleshooting. Select to troubleshoot your SAN.
Trace Route. Select to view the route information
between two device ports.
Device Connectivity. Select to view the connectivity
information for two devices.
Fabric Device Sharing. Select to determine if the
selected fabrics are configured to share devices.
IP Troubleshooting. Select to troubleshoot your IP.
Ping. Select to perform a zoning check between the
selected device port WWNs.
Trace Route. Select to view the route information from
a source port on the local device to a destination port
on another device.
Performance. Select to view IP performance between
two devices.
List Zone Members. Select to display all members in a
zone.
Monitor Menu.
Performance. Select to monitor SAN devices.
View Utilization. Select to display connection
utilization.
HIstorical Data Collection. Select to monitor historical
data on the entire SAN or selected parts of the SAN.
You can also disable historical data monitoring.
End-to-End Monitors. Select to monitor end-to-end
connections.
Configure Thresholds. Select to monitor thresholds.
Clear Counters. Select to clear all port statistics
counters.
Top Talkers. Select to monitor performance through a
real-time list of top conversations for a switch or port
along with related information.
Real-Time Graph. Select to monitor performance
through a graph, which displays transmit and receive
data. The graphs show real-time data.
Historical Graph. Select to monitor a performance
through a graph, which displays transmit and receive
data. The graphs show historical data.
Menu Command Command Options