Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 421

53-1001357-01

Assigning a traffic class map to a port or link aggregation group

You can assign a Traffic Class map to a port or ports under the LAG; however, a port does not

require a Traffic Class map be assigned to it. A port can have either a CEE map or a Traffic Class

map assigned to it, but it cannot have both.

NOTE

You cannot configure QoS or LLDP-DCBX on a LAG.

1. Select Configure > CEE Switch > CEE from the menu bar.

The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and

functions.

2. Select a port or LAG, and click Edit.

3. Click the QoS tab on the Edit Switch dialog box.

The QoS dialog box displays.

FIGURE 161 QoS, assign a traffic class map to a port dialog box

4. Click the Assign a map to <port name> check box.

5. Select Traffic Class in the Map Type list.

6. Select a Traffic Class Map in the Traffic Class Map list.

7. Click OK to commit the map assignment.

The CEE Confirmation and Status dialog box displays.

8. Review the changes carefully before you accept them.

9. Click Start to apply the changes, or click Close to abort the operation.