Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

424 DCFM Enterprise User Manual
53-1001357-01
Editing an LLDP profile
13
Editing an LLDP profile
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
The LLDP Profile dialog box displays.
4. Select an LLDP Profile in the LLDP Profile table.
NOTE
You can edit the <Global Configuration> profile. You cannot, however, delete, rename, or
duplicate global configurations.
5. Click the left arrow to load the LLDP Profile’s values to the left pane.
6. Modify the values, as described in “Adding an LLDP profile” on page 423. You are not allowed
to modify the LLDP Profile’s name.
7. Click the right arrow to update the LLDP Profile parameters.
8. Click OK.
The CEE Confirmation and Status dialog box displays.
9. Review the changes carefully before you accept them.
10. Click Start to apply the changes, or click Close to abort the operation.
Deleting an LLDP profile
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
The LLDP Profile dialog box displays.
4. Select an existing LLDP Profile from the LLDP Profiles table in the upper right pane.
NOTE
You cannot delete <Global Configurations>. You can, however, edit global configurations. For
more information, see “Editing an LLDP profile” on page 424
5. Click Delete.
A confirmation dialog displays.
6. Click Yes to confirm you want to delete the LLDP profile.
The LLDP Profile table row is removed.