Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

12 DCFM Enterprise User Manual
53-1001357-01
Connectivity Map
1
• BB Credit. Displays the BB Credit for the product.
• Class. Displays the class to which the product belongs.
• Contact. Displays the name of the person or group you should contact about the product. This
field is editable at the fabric and device level.
• Description. Displays the description of the product. This field is editable at the fabric and
device level.
• Device Type. Displays the type of device.
• Domain ID. Displays the Domain ID for the product in the format xx(yy), where xx is the
normalized value and yy is the actual value on the wire.
• FC Address. Displays the Fibre Channel address of the port.
• Firmware. Displays the firmware version of the product. This field is editable at the device level.
• IP Address. Displays the IP address (IPv4 or IPv6 format) of the product. This field is editable at
the device level.
• Location. Displays the physical location of the product. This field is editable at the fabric and
device level.
• Model. Displays the model number of the product. This field is editable at the device level.
• Name. Displays the name of the product.
• Port #. Displays the number of the port.
• Port Count. Displays the number of ports on the product.
• Port Type. Displays the type of port (for example, expansion port, node port, or NL_port).
• Protocol. Displays the protocol for the device.
• Serial #. Displays the serial number of the product. This field is editable at the device level.
• Speed Configured (Gbps). Displays the actual speed of the port in Gigabits per second.
• State. Displays the port state.
• Status. Displays the status for the product.
• Symbolic Name. Displays the symbolic name for the product.
• TAG. Displays the tag number of the port.
• Vendor. Displays the name of the product’s vendor.
• WWN. Displays the world wide name of the product.
Connectivity Map
The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables:
• “Product icons” on page 17
• “Group icons” on page 18
• “Product status icons” on page 19
The Management application displays all discovered fabrics in the Connectivity Map by default. To
display a discovered Host in the Connectivity Map, you must select the Host in the Product List. You
can only view one Host and physical and logical connections at a time.