Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

430 DCFM Enterprise User Manual
53-1001357-01
Editing the parameters of an ACL
13
Editing the parameters of an ACL
You cannot change the name of the ACL (Standard or Extended) after you have created the ACL on
the switch.
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the Access Control List tab on the Edit Switch dialog box.
The Access Control List dialog box displays.
4. Select an ACL row in the ACLs table and click Edit.
5. Modify the ACL parameters, as required, using the parameter descriptions in “Adding an ACL to
a switch” on page 427.
6. Click OK to commit the ACL parameter changes.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.
Deleting an ACL
When you delete an ACL from the ACLs table, you are given the option to also remove the profile
from the entities where it is currently associated.
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the Access Control List tab on the Edit Switch dialog box.
The Access Control List dialog box displays.
4. Select the ACL that you want to delete from the ACLs table.
5. Click Delete.
The selected ACL is removed from the ACLs table.
6. Click OK to commit the ACL parameter changes.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.