DCFM Migration Guide v6.4.0 (53-1001776-01, June 2010)

DCFM Migration Guide 15 of 38
53-1001776-01
Professional edition migration
FIGURE 1 Server IP Configuration screen
8. Complete the following steps on the Server Configuration screen.
NOTE
Do not use port 1527 for any of these port numbers. Port 1527 is used internally by the server.
FIGURE 2 Server Configuration screen
a. Enter a port number in the Syslog Port # field (default is 514).
NOTE
If the default syslog port number is already in use, you will not receive any syslog messages from the device.
To find and stop the process currently running on the default Syslog port number, refer to “Syslog
troubleshooting” on page 36.
b. Enter a port number in the Web Server Port Number field (default is 80).
c. Enter a port number in the SNMP Port # field (default is 162).
d. Enter a port number in the Starting Port # field (default is 24600).
NOTE
The server requires 13 consecutive free ports beginning with the starting port number.