Brocade Fabric OS v6.4.3f Release Notes v1.0

Close with Code Change in Fabric OS v6.4.1b
Fabric OS v6.4.3f Release Notes v1.0 Page 102 of 149
Defect ID: DEFECT000327226
Technical Severity: High
Summary: After executing shut/no shut on port-channel member, sync is not regained preventing port
from coming back online
Symptom: Link member is lost from trunk group
Feature: CEE-Infrastructure
Function: ANVIL DRIVER
Probability: Medium
Found in Release: FOS6.4.0
Defect ID: DEFECT000327375
Technical Severity: High
Summary: Brocade 7500/FR4-18i faults due to backend link timeouts when GE cable is pulled and
link is active
Symptom: Switch or blade must be reset to bring it back online and restore functionality
Feature: 4G ASIC Driver
Function: ASIC Driver
Probability: Medium
Found in Release: FOS6.4.1
Service Request ID: 492575
Defect ID: DEFECT000328773
Technical Severity: High
Summary: With 2 DCXs configured as FCRs on a common backbone and connected via FCIP tunnels,
edge devices cannot be discovered after enabling FastWrite
Symptom: Edge devices are no longer accessible after enabling FastWrite in this configuration
Workaround: Disable FastWrite
Feature: FCIP
Function: FCIP Port
Probability: High
Found in Release: FOS7.0.0
Defect ID: DEFECT000332988
Technical Severity: High
Summary: SNMP trap test indicates that trap information for the LinkDown & LinkUp is not assigned
properly for CEE ports of the Brocade 8000
Symptom: SNMP trap information for CEE ports will be incorrect as it is not assigned to the correct
fields.
Feature: CEE-MANAGEABILITY
Function: SNMP INTERFACE
Probability: High
Found in Release: FOS6.4.0
Service Request ID: 496687
Defect ID: DEFECT000338044
Technical Severity: High
Summary: When DCFM polls the container configuration hosted on a BES or FS8-18, it exposes a
resource contention condition. Eventually this results in the BES/FS8-18 faulting,
Symptom: BES or FS8-18 faulted with v6.4.1 or v6.4.1a. This issue is exposed when DCFM is
configured to monitor the BES or FS8-18 blade or CLI continual polling of configuration and
statistics from the command line interface. If DCFM is not used in the environment, it is
unlikely the customer will encounter the issue.
Feature: Field Escalation
Function: Encryption
Probability: High
Found in Release: FOS6.4.1
Service Request ID: 548739