Brocade Fabric OS v6.4.3f Release Notes v1.0

Close with Code Change in Fabric OS v6.4.3b
Fabric OS v6.4.3f Release Notes v1.0 Page 50 of 149
Defect ID:
DEFECT000383577
Technical Severity:
High
Summary:
CRC with good EOF detected on ICL ports
Symptom:
Observed CRC with good EOF on multiple ICL ports between a DCX and DCX-4S.
Probability:
Low
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS6.4.2
Service Request ID:
693593,693593
Defect ID:
DEFECT000387013
Technical Severity:
Medium
Summary:
Stale AG entry remains present in management server database after the removal of AG.
Symptom:
Switch stays in manageability view even after it is physically removed from fabric.
Probability:
Low
Feature:
FOS Software
Function:
Access Gateway
Reported In Release:
FOS6.2.2
Service Request ID:
699581
Defect ID:
DEFECT000387536
Technical Severity:
Medium
Summary:
Perfttmon only seems to output ingress values when egress is chosen
Symptom:
In NPIV setup, unable to get valid data for running perfttmon.
Probability:
High
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.0.1
Service Request ID:
693225
Defect ID:
DEFECT000387601
Technical Severity:
Medium
Summary:
Embedded platform with internal CU port turned into G Port
Symptom:
Server lost access to the devices when internal CU port connected to HBA turned into G_Port.
Probability:
Medium
Feature:
8G ASIC Driver
Function:
ASIC Driver
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000389391
Technical Severity:
Medium
Summary:
CLI portname -i 0-79 -f will cause the switch to panic
Symptom:
When user enters an index range with larger value than is actually present with portname -i -f
command, the switch panics.
Probability:
Low
Feature:
FOS Software
Function:
Panic / OOM
Reported In Release:
FOS6.4.2
Service Request ID:
711133
Defect ID:
DEFECT000394217
Technical Severity:
Medium
Summary:
Onboard Administrator is not reporting correct IP address for BR5480 after FWDL to v6.4.x when
using DHCP
Symptom:
After upgrading embedded Brocade SAN switch to FOS v6.4.0 and above, the management IP
address is shown as 0.0.3.0
Workaround:
Reboot switch after firmwaredownload
Probability:
High
Feature:
Embedded Platform Services
Function:
Bulova
Reported In Release:
FOS6.4.2
Service Request ID: