HP DC SAN Backbone Director Switch Hardware Reference Guide (5697-2158, August 2012)

Table 18 Critical information checklist (continued)
Notes regarding supportshow output:
Information about the new chassis
New Factory Serial Number:
New Serial Number (if available):
To record critical DC SAN Director and SAN information:
1. Open a Telnet session and log in to the DC SAN Director as admin. The default password
is password. Enable the logging function on your Telnet or serial console connection.
2. Back up the current configuration.
Enter the configUpload command, and then enter the requested information at the prompts.
This command uploads the DC SAN Director configuration to the customer-defined FTP server,
making it available for downloading. For more information about this command, see the
Fabric OS Command Reference Manual.
NOTE: If you are using the VF feature, run configUpload -vf before running the
configUpload command to save the logical switch configuration.
rsl8-st03-dcx-1:admin> configupload
Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 123.123.123.123
User Name [user]: Admin24
File Name [config.txt]: config-switch0.txt
Password:
Upload complete
rsl8-st03-dcx-1:admin>
84 Replacing DC SAN Director FRUs