HP DC SAN Backbone Director Switch Hardware Reference Guide (5697-2158, August 2012)

3. Resolve any issues or unintentional changes to the DC SAN Director or fabric.
• If there are any mechanical problems, try reseating the associated component.
• If the configuration information is not correct for the DC SAN Director, modify as required.
If necessary, the configuration saved before the replacement can be downloaded using
the configDownload command.
The configDownload command can be entered through a Telnet or serial session, but
the DC SAN Director must have an Ethernet connection to the server name or IP of the
host for the download process to complete. For more information, see the help
configdownload command or the Fabric OS Command Reference Manual.
rsl8-st03-dcx-1:admin> configdownload
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch.txt
Password: xxxxxxxx
download complete
rsl8-st03-dcx-1:admin>
• If other issues exist, contact HP.
Cable routing table
Table 19 (page 94) is a 48-port template for a cable-routing table. Expand the table for the number
of ports in the DC SAN Director.
Table 19 Cable routing table for DC SAN Director (48 ports shown)
Slot/port of deviceConnected deviceCable labelsSlot/port
Device endSwitch endPortSlot
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
94 Replacing DC SAN Director FRUs