Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 969
53-1002167-01
About user privileges
C
TABLE 53 SAN privileges and application behavior
Privilege Description No Privilege Read-Only Read/Write
SAN - Discovery Setup Allows you to configure
discovery setup.
Disables Setup on the
Discover menu and
toolbar.
Enables Setup on the
Discover menu and
toolbar.
Allows you to open the
Discover Setup dialog
box; however, disables all
functions.
Enables Setup on the
Discover menu and
toolbar.
Enables all functions in
the Discover Setup dialog
box.
SAN - Element Manager -
Product Maintenance
NOTE
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
An Element Manager
privilege that enables
maintenance functions.
Disables the functions
described in the Element
Manager User Manual for
which you do not have
rights.
Displays the message,
“You do not have rights to
perform this action.”
Same as No Privilege. Enables the functions
described in the Element
Manager User Manual.
SAN - Fabric Binding Allows you to configure
fabric binding.
Disables the Fabric
Binding command.
Enables the Fabric
Binding command;
however, disables
funtions on the dialog
box.
Enables the Fabric
Binding command and all
funtions on the dialog
box.
SAN - Element Manager -
Product Operation
NOTE
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
An Element Manager
privilege that enables
operator functions.
Disables the functions
described in the Element
Manager User Manual for
which you do not have
rights.
Displays the message,
“You do not have rights to
perform this action.”
Same as No Privilege.
Enables the functions
described in the Element
Manager User Manual.
SAN - Fabric Tracking Allows you to define the
current devices and
connections present in a
fabric as a baseline and
to highlight any changes
to that baseline.
Disables the Track Fabric
Changes and Accept
Changes commands on
the Monitor menu and
right-click menus of
Fabrics.
Same as no privilege. Enables the Track Fabric
Changes and Accept
Changes commands on
the Monitor menu and
right-click menus of
Fabrics.
SAN - FCIP Management Allows you to configure
FCIP tunnels and
troubleshooting of IP
interfaces (IP
performance, IP ping and
IP trace route).
Disables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands. Disables the
FCIP Tunnel command on
the Fabric right-click
menu.
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Only enables the Cancel
function for the dialog box
boxes.
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Enables all commands
and functions on the
associated dialog box
boxes. Also enables all
commands on the FCIP
Tunnels tab in the
device’s Properties dialog
box.