Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

1086 Brocade Network Advisor SAN User Manual
53-1002167-01
Database tables and fields
E
QOS_NAME Name of the QoS Map set on the port varchar 64
DOT1X_ENABLED Indicate if 802.1x authentication is enabled on this
port. The default value is 0.
smallint
TABLE 285 CLIENT_VIEW_MEMBER_HOST
Field Definition Format Size
CLIENT_VIEW_ID Primary key of CLIENT_VIEW table int
HOST_ID Primary key of DEVICE_ENCLOSURE table int
TABLE 286 CLUSTER
Field Definition Format Size
ID * Arbitrary integer to identify the cluster. int
NAME User-assigned name to identify the cluster. Names
should be unique to avoid user confusion,
but the database does not enforce uniqueness.
varchar 64
IP_ADDRESS The primary hostname or IP address for managing the
cluster as a single entity.
The definition of primary depends on the clustering
technology.
varchar 64
TABLE 287 CLUSTER_MEMBER
Field Definition Format Size
CLUSTER_ID Identifies the cluster containing a member. int
DEVICE_ENCLOSURE_ID Identifies a member of the cluster. int 32
TABLE 288 CNA_ETH_PORT
Field Definition Format Size
ID ID of the Eth port int
ETH_DEV Ethernet device varchar 64
ETH_LOG_LEVEL The default value is 1. int
NAME Name of the port varchar 256
MAC_ADDRESS MAC Address varchar 64
IOC_ID IO controller ID. The default value is 0. varchar 64
HARDWARE_PATH Hardware path of the port varchar 256
STATUS Status of the Eth port. The default value is -1. varchar 64
CNA_PORT_ID ID of the parent port int
CREATION_TIME timestamp
CURRENT_MAC_ADDRESS User definable Mac address which is by default same
as built in Mac address
varchar 64
TABLE 284 CEE_PORT (Continued)
Field Definition Format Size