Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 71
53-1002167-01
Host discovery
3
Importing Hosts from a VM manager
To discover Hosts from a discovered VM manager, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 29 Add Host Adapters dialog box
3. Enter a discovery request name (such as, MyVMManager) in the Discovery Request Name
field.
4. Select Hosts from VM Manager from the import by list.
5. Select All VM or an individual VM from the list.
6. Click Add.
All hosts which are part of a discovered VM manager and have a registered host name display
in the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
7. Configure Host credentials, if necessary.
a. Enter the HCM Agent port number in the Port field.
b. Enter your username in the User ID field.
c. Enter your password Password field.