Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 73
53-1002167-01
Host discovery
3
To delete a host from active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to delete from active discovery in the Discovered Hosts table.
3. Click Delete.
4. Click OK on the confirmation message.
The deleted host displays in the Previously Discovered Addresses table.
5. Click Close on the Discover Host Adapters dialog box.
Rediscovering a previously discovered fabric
To return a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to return to active discovery in the Previously Discovered Addresses
table.
3. Click Discover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table.
5. Click Close on the Discover Host Adapters dialog box.
Deleting a host adapter from discovery
To delete a host permanently from discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to delete permanently from discovery in the Previously Discovered
Addresses table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Host Adapters dialog box.