Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 79
53-1002167-01
VM Manager Discovery
3
Deleting a VM manager from discovery
To delete a host permanently from discovery, complete the following steps.
1. Select Discover > VM Managers.
The Discover VM Managers dialog box displays.
2. Select the VM manager you want to delete permanently from discovery in the Previously
Discovered Addresses table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover VM Managers dialog box.
Viewing the VM manager discovery state
The Management application enables you to view device discovery status through the Discover VM
Managers dialog box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > VM Managers.
The Discover VM Managers dialog box displays.
2. Right-click the Hosts node select Expand All to show all devices.
The Discovery Status field details the actual status message text, which varies depending on
the situation.
The following are samples of actual VMM status messages:
• Active
• Failed – Not reachable
• Failed – Authentication failure
The following are samples of actual ESX host status messages:
• Active
• Discovery pending,
• Excluded,
• Conflict – Existing Host <hostname>