Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 127
53-1002167-01
Software Configuration
4
Server port
You can configure the server port settings so that you can assign a web server port number and set
the server port to be SSL-enabled.
Configuring the server port
To configure server settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays (Figure 53).
2. Select Server Port in the Category list.
FIGURE 53 Options dialog box (Server Port option)
3. Select the Enable SSL check box to enable this function for the server port.
4. Enter a port number in the Web Server Port # field.
NOTE
Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.
5. Enter a port number in the Starting Port # field.
For Professional, the server requires 13 consecutive free ports beginning with the starting port
number.
For Trial and Licensed version, the server requires 16 consecutive free ports beginning with the
starting port number.