Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

164 Brocade Network Advisor SAN User Manual
53-1002167-01
Editing a call home center
6
Editing an E-mail call home center
E-mail call home centers are available for Brocade, IBM, and Oracle. To edit one of these call home
centers, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the call home center you want to edit (Brocade E-mail, IBM E-mail, or Oracle E-mail) in
the Call Home Centers table.
3. Click Edit Centers (beneath the Call Home Centers table).
The Configure Call Home Center dialog box displays (Figure 59).
FIGURE 59 Configure Call Home Center dialog box (Brocade, IBM, or Oracle E-mail option)
4. Make sure the call home center type you selected displays in the Call Home Centers list.
5. Select the Enable check box to enable this call home center.
6. Enter the customer contact name in the Customer Details - Name field.
7. Enter th e c o m p a ny n a me in t h e Customer Details - Company field.
8. Enter the phone number of the customer contact in the Customer Details - Phone (Office) field.
9. Enter the mobile phone number of the customer contact in the Customer Details - Phone
(Mobile) field.
10. Enter the name of the server in the SMTP Server Settings - Server Name field.
11. Select the SMTP over SSL check box to enable secure communication between the SMTP
server and the Management application.
12. Enter the port number (default is 465 if SMTP over SSL is enabled; otherwise, the default is
25) of the server in the SMTP Server Settings - Port field.
13. Enter a user name in the SMTP Server Settings - Username field.
This is a required field when the SMTP server authentication is enabled.