Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 179
53-1002167-01
Deleting a customized view
7
Deleting a customized view
To delete a customized view, use the following procedure.
1. Select View > Manage View > Delete View > View_Name.
2. Click Yes on the message.
If you delete the current view, the view changes to the default view (View All).
Copying a view
To copy a customized view, use the following procedure.
1. Use one of the following methods to open the Copy View dialog box:
• Select View > Manage View > Copy View > View_Name.
• Select Copy View from the View All list. The View All list does not display until you discover a
fabric or host.
The Copy View dialog box displays the name of the view you are copying.
FIGURE 66 Copy View dialog box
2. Enter a name (128-character maximum) in the Name field and a description (126-character
maximum) in the Description field for the view.
NOTE
You cannot use the name “View” or “View All” in the Name field.
NOTE
You cannot use an existing name in the Name field.
3. Click OK to save your changes and close the Copy View dialog box.
4. Verify that the copied view displays on the main window of the Management application.