Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

186 Brocade Network Advisor SAN User Manual
53-1002167-01
Grouping on the topology
7
Configuring custom connections
NOTE
Active zones must be available on the fabric.
To create a display of the connected end devices participating in a single zone or group of zones,
complete the following steps.
1. Choose one of the following options:
• Select a fabric on the topology and select View > Connected End Devices > Custom.
• Right-click a fabric on the topology and select Connected End Devices > Custom from the
shortcut menu.
The Connected End Devices - Custom display for Fabric dialog box displays with a list of zones
in the Zones in Fabric list.
2. Select the zones you want to include in the connection in the Zones in Fabric list.
3. Select the application to which you want to add the selected zones in the Application list.
4. Click the right arrow button to move the zones to the Selected Zones list.
5. Click OK.
Saving a custom connection configuration
NOTE
Active zones must be available on the fabric.
To save a new custom connection configuration, complete the following steps.
1. Choose one of the following options:
• Select a fabric on the topology and select View > Connected End Devices > Custom.
• Right-click a fabric on the topology and select Connected End Devices > Custom from the
shortcut menu.
The Connected End Devices - Custom display for Fabric dialog box displays with a list of zones
in the Zones in Fabric list.
2. Select the zones you want to include in the connection in the Zones in Fabric list.
3. Click the right arrow button to move the selected zones to the Selected Zones list.
4. Click Save.
The Save Application dialog box displays.
5. Enter a new name in the Application Name field.
6. Click OK on the Save Application dialog box.
7. Cl ic k OK on the Connected End Devices - Custom display for Fabric dialog box.
The saved custom connection configuration displays in the Connected End Devices menu.