Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 219
53-1002167-01
AAA Settings
9
6. Select the authentication policy (PAP or CHAP) from the Authentication Type field.
Default is CHAP.
7. Enter the shared secret in the Shared Secret and Confirm Secret fields.
8. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
retries when the server is busy in the Timeout (Sec) field.
Default is 3 seconds.
9. Enter the number of attempts to be made to reach a server before assuming it is unreachable
in the Attempts field.
Default is 3 attempts.
10. Click OK to return to the AAA Settings tab.
11. If you have established an active connection with the Radius server, click Test.
Test attempts to contact the Radius server by issuing a ping command.
12. Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
• Local Database
• None
13. Set the fall back condition to secondary authentication by selecting one of the following
options from the Switch to secondary authentication when list:
• Radius Servers Not Reachable
• Radius Authentication Failed
14. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
• Local Database
• Primary Authentication Server
15. Click Apply to save the configuration.