Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

228 Brocade Network Advisor SAN User Manual
53-1002167-01
Upgrading HCM on the Management server
9
3. Enter the path where you want to save the support data and a name for the support save file in
the Output Path field.
For example, Full_Path\Support_Save_File_Name.zip. You can also browse to the location you
want to save the support data and append the file name to the path when you return to the
Techncial Support Information tab.
If you do not specify an output path, the Management application automatically saves the data
to the Install_Home/support directory. The default name of the Server Support Save is
DCM-SS-Time_Stamp.
NOTE
For Linux systems, you cannot have blank spaces in the output path (target directory). If the
output path contains blank spaces, the supportShow files are not complete.
4. Click Capture.
A confirmation message displays when the capture is complete.
5. Click OK.
Upgrading HCM on the Management server
The HCM Upgrade tab enables you to upgrade the Management application to include a new
version of HCM.
To upgrade HCM, complete the following steps.
1. Select the HCM Upgrade tab.
FIGURE 83 HCM Upgrade tab
2. Click Browse to select the HCM installation folder location (for example, C:\Program
Files\BROCADE\Adapter on Windows systems and /opt/brocade/adapter on Linux systems).
3. Click Upgrade.
4. Click Close.